MSR系列路由器
ISDN回呼功能的配置
关键词:MSR; ISDN; 回呼
一、组网需求:
两台MSR路由器通过E1线路直连,实现ISDN Pri回呼功能
设备清单: MSR系列路由器2台,MIM-2E1模块2个,E1线1根。
二、组网图:
三、配置步骤:
RTA配置 |
# sysname
rta # dialer-rule
1 ip permit # controller
E1 6/0 pri-set clock master # controller E1 6/1 # interface Serial6/0:15 link-protocol ppp ip
address dialer enable-circular dialer-group 1 dialer number 6688012 isdn protocol-mode network //指定回呼的号码为6688011 isdn calling 6688011 |
RTB配置 |
# sysname
rtb # dialer-rule
1 ip permit #
controller
E1 6/0 pri-set # controller
E1 6/1 # interface
Serial6/0:15 link-protocol
ppp ip
address dialer
enable-circular dialer-group
1 dialer
route i //配置允许号码6688011进行回呼 dialer call-in 6688011 callback |
四、配置关键点:
1) 指定回呼号码
2) 设置RTA的Serial6/0:15下ISDN协议模式为network,RTB默认为user
2) 假如中间有其它设备注意互连端口的工作模式,是主还是从,是网络侧还是用户侧。
五、结果验证
1) 从RTA ping RTB的接口地址,触发拨号:
<rta>ping
Request time out
Request time out
Request time out
%Dec 26 16:57:26:176 2006 rta IFNET/4/UPDOWN:
Line protocol on the interface Serial6/0:0 is UP
%Dec 26 16:57:26:188 2006 rta IFNET/4/UPDOWN:
Protocol PPP IPCP on the interface Serial6/0:0 is UP
Request time out
Reply from
---
5 packet(s) transmitted
1 packet(s) received
80.00% packet loss
round-trip min/avg/max = 26/26/26 ms
<rta>dis isdn call-in
Serial6/0:15(Network-side) :
Link Layer 1: TEI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Network Layer: 1 connection(s)
Connection 1 :
CCIndex:0x001d , State: Active , CES:1 , Channel:0x00000002
TEI: 0
Calling_Num[:Sub]: :
Called_Num[:Sub]: 6688011:
2) 查看隧道接口的状态如下:
<rta>dis isdn active-channel
Serial6/0:15
Channel Info: B1
Call Property: Digital Call Type: In
Calling Number: - Calling Subaddress: -
Called Number: 6688011 Called Subaddress: -
UserName:
-
IP Address:
Start Time: 06-12-26 16:57:23
Time Used: 00:00:18